As part of our Peerless eLearning Training Series, this is a recorded webinar with our partner Hose Master LLC to discuss the topic of Metal Hose. This discussion covers the following:

  • General Design & Construction
  • Installation Do’s and Don’ts to maximize the life of hose
  • Application information
  • Typical failure modes and how to avoid

You may also like

Ball Valves 101
As part of our Peerless eLearning training series, this is a recorded webinar with our partner, J Flow Controls to discuss Quarter Turn Ball Valves.
Corrosion Under Insulation (CUI)
As part of our Peerless eLearning webinar series, this is a recorded webinar with our partner ROCKWOOL to discuss the topic of Corrosion Under Insulation (CUI).
Teflon Hose 101
As part of our Peerless eLearning Webinar series, this is a recorded webinar with our partner Aflex Hose to discuss the topic of selecting the proper style PTFE hose for your application.
Electrical Area Classification
As part of our Peerless eLearning Training Series, this is a recorded webinar with our partner Allied Circuits, to discuss the topic of Electrical Area Classification.
How to Protect Instrumentation using Diaphragm Seals
As part of our Peerless eLearning webinar series, this was a recorded webinar with our partner REOTEMP Instruments to discuss the topic of protecting instrumentation using Diaphragm Seals.
Coriolis Mass Meters, Featuring KROHNE
This was a recorded webinar with our partner KROHNE to discuss the topic of Coriolis Mass Meters.
Double Block & Bleed Valves, Traditional Methods vs. Current Best Practices
As part of our Peerless eLearning series, this was a recorded webinar with our partner Oliver Valves, to discuss the topic of Double Block and Bleed Valves (DBBs). We compared traditional methods of DBB valves with current best practices.
How To Avoid Expansion Joint Failures – Design Do’s and Don’ts
As part of our Peerless eLearning Webinar Series, this was a recorded presentation with our partner Hose Master, to discuss the topic of Expansion Joints Design, Do’s and Don’ts.
How to Select the Right Coupling Style
As part of the Peerless eLearning webinar series, this was a recorded webinar with our partner OPW, to discuss how to select the best coupling option for your application.
Canadian Registration Demystified
As part of our Peerless eLearning Webinar Series, this is a recorded webinar featuring Steve Munn, president of PV Engineering based in Waterloo, Ontario.

Page 1 of 3